Construction

Construction time clock app with GPS clock-in on site

NoBadge is a GPS time clock for construction companies. Operatives clock in with one tap on their own smartphone at the building site; NoBadge stores the position and time, checks it against that site's geofence and shows it live on your dashboard. No terminals, unlimited sites, €5,04 a month for each operative who clocks in.

Geofence per siteUnlimited sitesGDPR · EU servers
Construction workers clocking in on a building site with the NoBadge GPS time clock app
2 minto set up your first site
€0hardware on any site
70%less attendance admin
<30 daystypical payback
The problem

Why building site attendance still goes wrong

Construction teams move between sites, start early and finish when the job is done. The tools most contractors use to record their hours were never designed for that.

Hours written from memory

Paper sheets, WhatsApp messages and a spreadsheet on Friday. Manual timesheets carry an error rate of around 15%, worth €1,500–€2,000 a year in payroll mistakes for a 20–30 person business.

Terminals don't follow the job

A badge terminal costs €800–€2,000, needs power and shelter and stays bolted to one gate. On a site that lasts three months, buying and moving hardware rarely makes sense.

No proof of who was where

When a client queries the hours on a job, or a gang starts late, you find out at payroll time, with nothing but someone's word to go on.

How it works

GPS clock-in on every building site in four steps

NoBadge is a GPS time clock first: the operative's own phone is the time clock, so a new building site is ready in about 2 minutes, with no hardware to install.

  1. Add each site

    Enter the address of every building site and set its geofence radius: wider for a large development, tighter for a single house.

  2. Invite the crew

    Send a link on WhatsApp or by email. Operatives open NoBadge in the phone browser, with no app store download.

  3. Clock in at the gate

    One tap. NoBadge records position and time, and refuses any clock-in that falls outside the site zone.

  4. Export for payroll

    Hours, overtime and absences per worker and per site, totalled automatically and exported to Excel in one click.

Watch the video

Several sites in one day: how do employees clock in?

They pick the site from the list, clock in by GPS inside the site area and move on to the next one. The office sees the hours site by site.

1 min 25 s · English voice-over and subtitles

Full transcript and chapters on the video page: several sites in one day, how to clock in.

Location integrity

GPS records you can rely on, explained honestly

No browser-based app can promise a 100% tamper-proof location. NoBadge layers practical safeguards so that a clock-in from the café down the road stands out straight away.

  • Geofence per site — a clock-in outside the allowed radius is refused; the admin can widen the radius if needed.
  • Corrections only by the admin — every change to a clock-in is made by the admin and carries a note.
  • Position stored with every clock-in — check where each punch happened whenever a client asks.
  • No tracking during the shift — location is captured only at clock-in and clock-out.
  • QR code at the site office — on long jobs, add a QR code time clock on a tablet in the cabin as on-site proof.
Building site with GPS clock-in pins showing operatives inside the site geofence in NoBadge
Features

Everything a contractor needs to run attendance across sites

One price, every feature, whether you run two sites or twenty.

Live view of every site

See who is on which site, who is late and who forgot to clock out, across all your jobs on one dashboard.

Unlimited sites

Add a site when a new job starts. Each one has its own geofence, team and reports, at no extra cost.

Missed clock-in alerts

Managers are alerted when someone has not clocked in, so a gap on site is spotted in the morning, not at month end.

Hours and overtime to Excel

GPS-verified hours with overtime already totalled, ready for your payroll provider or accountant in one click.

Leave and sick days

Holiday and absence requests approved from the phone, with push notifications at each step.

Leave management

Payslips and contracts

A document archive where each operative finds their own payslips and contracts, without asking the office.

Comparison

GPS time clock vs badge terminal vs paper timesheets

What changes on a typical contractor's sites when the phone becomes the time clock.

 NoBadge GPSBadge terminalPaper or WhatsApp
Hardware per siteNone, operatives use their own phones€800–€2,000 per terminal, plus powerNone
Opening a new siteAdd the address and radius in minutesBuy, install or move a terminalNew sheets to hand out and collect
Proof of presencePosition checked against the site geofenceBadge can be lent to a colleagueSelf-declared
Hours per siteLive, per worker and per siteOne export per terminalAdded up by hand
ErrorsExact time recorded at every clock-inForgotten and borrowed badgesAround 15%, €1,500–€2,000 a year
Customer

From WhatsApp messages to real-time site attendance

“On building sites nobody has time for complications. Our workers clock in from their phones and we monitor everything in real time. No badges, no hardware.”

Silviu Lascu · Owner, Sistad Italia (construction)

Compliance

Working time records for every operative and every site

Under the Working Time Regulations 1998, UK employers must keep adequate records of working hours, including the 48-hour weekly limit. Across the EU, the ECJ ruling C-55/18 requires a system that records daily working time. NoBadge gives you that record without extra paperwork.

  • Timestamped clock-in and clock-out for every worker on every site
  • Overtime calculated automatically
  • Records on EU servers, exportable whenever you need them
  • Location captured only at clock-in and clock-out, never during the shift

Read the Working Time Regulations UK guide.

NoBadge dashboard with hours, overtime and absences per construction site
Pricing

Construction time tracking pricing: pay only for operatives who clock in

The price per user never changes, but your monthly total does: NoBadge bills only the employees who actually clock in that month.

One simple price

€5,04

per active user / month · all features · billed monthly

Your bill follows your team, month by month

Month 1 · 10 employees clock in10 × €5,04 = €50,40
Month 2 · only 2 clock in2 × €5,04 = €10,08

Nobody clocks in that month? You pay €0.

  • GPS clock-in with geofence per site
  • Dynamic QR code clock-in
  • Leave, sick days and absence management
  • Live dashboard and one-click Excel export
  • Unlimited sites, EU servers, GDPR compliant
Start free 15-day trial

No credit card · No contract · 50+ employees? Ask for custom pricing

FAQ

Construction time tracking: frequently asked questions

The operative opens NoBadge on their smartphone at the site and taps Clock in. NoBadge records the position and the time and checks them against the geofence you set for that site. The clock-in appears on the manager's live dashboard straight away, and a clock-in outside the zone is refused. No terminal or badge reader is needed on site.

No browser-based app can guarantee a 100% tamper-proof location. NoBadge reduces the risk with location-falsification safeguards: a geofence per site that refuses clock-ins outside the site area, the stored position and time of every clock-in, and corrections only by the admin, with a note. On long-running sites you can also display the dynamic QR code in the site office as proof of physical presence.

Operatives can clock in by GPS even with no signal: the clock-in is saved on the phone with the phone's time and sent automatically when the connection returns, or with “Sync now”. The app only needs to have been opened online once. QR clock-in, by contrast, needs a signal. Set the geofence so that it covers the point where your crew arrives and clocks in.

Yes. NoBadge includes unlimited sites at no extra cost, each with its own geofence, team and reports. When a crew moves to a new job, add the new site and they clock in there the next morning. The dashboard shows attendance across all sites in one view.

No. NoBadge is a Progressive Web App that runs in the browser of any Android phone or iPhone. Workers receive a link on WhatsApp or by email, open it and can clock in. There is no app store download and no update to manage, which makes onboarding new starters on site quick.

€5,04 per active user per month, with every feature included. The total is variable: if 25 operatives clock in during a busy month you pay 25 × €5,04 = €126,00; if only 8 clock in during a quiet month you pay €40,32, and a month with nobody clocking in costs €0. No hardware, no setup fee. See the pricing page.

Keep exploring

More industries, features and help

Start today

Get GPS-verified hours from every building site, starting today.

Create your account, invite your team and see the first clock-in in under 2 minutes. Free trial, no credit card, no hardware.

No contract · Cancel anytime · EU hosted · GDPR compliant

English Deutsch Español Français Română